DSX Transfer switching equipment TSE Frame 2(160A) - 4 poles - Rated current = 100A - mounting on DIN rail
DSX TSE 160
LEGRAND
DSX Transfer switching equipment TSE Frame 2(160A) - 4 poles - Rated current = 100A - mounting on DIN rail
REF. 424109
EAN.
3414971939158
Share
You can only compare 4 products, you must remove 1 to add this one
Technical characteristics
| Version as main switch | Yes |
|---|---|
| Version as maintenance-/service switch | Yes |
| Version as safety switch | Yes |
| Version as emergency stop installation | Yes |
| Version as reversing switch | No |
| Number of switches | 2 |
| Max. rated operation voltage Ue AC | 690 V |
| Rated permanent current Iu | 100 A |
| Rated permanent current at AC-23, 400 V | 100 A |
| Rated permanent current at AC-21, 400 V | 100 A |
| Rated short-time withstand current lcw | 3 kA |
| Rated operation power at AC-23, 400 V | 40 kW |
| Conditioned rated short-circuit current Iq | 14 kA |
| Number of poles | 4 |
| Number of auxiliary contacts as normally closed contact | 4 |
| Number of auxiliary contacts as normally open contact | 4 |
| Motor drive optional | No |
| Motor drive integrated | No |
| Voltage release optional | No |
| Device construction | Built-in device fixed built-in technique |
| "ERROR:#N/A" | No |
| Suitable for front mounting 4-hole | Yes |
| Suitable for front mounting centre | No |
| Suitable for distribution board installation | Yes |
| Type of control element | Turn button |
| Interlockable | No |
|---|---|
| Type of electrical connection of main circuit | Cable clamp |
| Degree of protection (IP), front side | IP20 |
| Degree of protection (NEMA) | 1 |
| Width | 216 mm |
| Height | 95 mm |
| Depth | 67.2 mm |
| Operating / setting temperature | -25-70 °C |
| Storage temperature | -25-70 °C |
| Voltage type | AC/DC |
| Electric supplying direction | By the top or bottom |
| Terminal marking indication | Yes |
| Colour | Grey |
| RAL-number | 7035 |
| Halogen free | Yes |
| Terminals capacity | 25-70 mm² |
| Connection type | Cable |
| Label space/information surface | No |
| Contains Batteries and/or Accumulator | No |
| IEC code (Pack1) | Not applicable |
| Battery ou Accumulator (Pack1) | Not applicable |
| Element Composition (Pack1) | Not applicable |
| IEC code (Pack2) | Not applicable |
| Battery ou Accumulator (Pack2) | Not applicable |
| Element Composition (Pack2) | Not applicable |
Documentation
1 document
Technical Sheet
2 documents
Catalogue Commercial Page
Catalogue Technical Page
1 document
3D Autocad
SELECT AN ACTION