Living Now - LED Reading lamp dimmable, 230V, 1 module, Sand
Living Now
BTICINO
Living Now - LED Reading lamp dimmable, 230V, 1 module, Sand
REF. BT-KM4362
EAN.
8005543653593
Share
You can only compare 4 products, you must remove 1 to add this one
Technical characteristics
| Suitable for wall mounting | Yes |
|---|---|
| Suitable for suspended mounting | No |
| Suitable for ceiling mounting | No |
| Suitable for built-in mounting | Yes |
| Suitable for surface mounting | Yes |
| Suitable for light line configuration | No |
| Suitable for workplace according to EN 12464-1 | No |
| Lamp type | LED not exchangeable |
| With light source | Yes |
| Suitable for number of light sources | 1 |
| Lamp holder | Other |
| Housing material | Plastic |
| Housing colour | Black |
| Material cover | Plastic, opal |
| Type of grid | White |
| Voltage type | AC |
| Nominal voltage | 230-250 V |
| Nominal current | 15-25 mA |
| Type of control gear | LED operating device voltage-controlled |
| With control gear | No |
| Dimming 0-10 V | No |
| Dimming 1-10 V | No |
| Dimming DALI | No |
| Dimming DMX | No |
| Dimming DSI | No |
| Dimming potentiometer (integrated) | No |
| Dimming LineSwitch | No |
| Dimming manufacturer's proprietary system | No |
| Dimming mains voltage modulation | No |
| Dimming phase cut-off (trailing edge) | No |
| Dimming phase cut-on (leading edge) | No |
| Dimming programmable | Yes |
| Dimming RF | No |
| Dimming Sine Wave Reduction | No |
| Dimming Touch and Dim | Yes |
| Dimming Zigbee | No |
| Dimming with push-button | Yes |
| "ERROR:#N/A" | No , 246 lm |
| Light distributor | Diffuser lens/optic/panel |
| Light distribution | Symmetric/asymmetric |
| Beam angle | Open beam/diffuse |
| Light outlet | Direct |
| Degree of protection (IP) | IP41 |
| degree of impact strength (IK) | IK04 |
| Protection class according to IEC 61140 | None |
| Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24 | No |
| Rated ambient temperature according to IEC 62722-2-1 | -5-35 °C |
| Suitable for emergency lighting | No |
| Emergency power supply integrated | No |
|---|---|
| With movement sensor | No |
| With light sensor | No |
| Covering of the luminaire with thermally insulating material possible | No |
| With air slots | Yes |
| Filament test according to IEC 60695-2-11 | None |
| Suitable for lamp power | 0.1-0.2 W |
| Max. system power | 0.3 W |
| Colour of light | White |
| Colour temperature | 4000-5500 K |
| Colour rendering index CRI | 80-89 |
| Width | 22 mm |
| Height/depth | 375 mm |
| Length | 86 mm |
| Built-in width | 22 mm |
| Built-in height/depth | 86 mm |
| Type of wiring | Ending |
| Number of poles | 2 |
| Conductor cross section | 1.5 mm² |
| Connection type | Screwed terminal |
| Operation by Bluetooth | No |
| Compatible with Apple HomeKit | No |
| Compatible with Google Assistant | No |
| Compatible with Amazon Alexa | No |
| IFTTT support available | No |
| Operating / setting temperature | -5-35 °C |
| Storage temperature | -10-70 °C |
| Frequency | 50-60 Hz |
| Standby consumption | 136 mA |
| Mandatory neutral | No |
| RAL-number | 1015 |
| Halogen free | Yes |
| Antimicrobial treatment | No |
| Terminals capacity | 1-1.5 mm² |
| Cable nature for connection | Flexible or rigid |
| With socket outlet | No |
| Fitted with rainproof plate protection | No |
| With complemantary luminous signal | No |
| Supplied remote control | No |
| Maximum Input cable diameter | 2.5 mm |
| Vertical fixing center distance | 9-9.2 mm |
| Horizontal fixing center distance | 4-4.2 mm |
| Cable support | Screw cable clamp |
| Auto switch | No |
| Control mode | Wired |
| Addressable | No |
| Connected object | No |
Documentation
2 documents
Technical Sheet
Instruction Use
2 documents
Catalogue Commercial Page
Catalogue Commercial Page
2 documents
BIM Data
BIM Data
SELECT AN ACTION